Environmentally friendly type A foam fire extinguishing agent
According to the increasing complexity of fire sources in Class A fire places, low water use efficiency, and resistance to burning and re-ignition, the use of existing foam fire extinguishing foam supply is large and wasteful. This new type A foam can be controlled according to different ratios. The amount of foam is used to achieve the best fire extinguishing effect. It increases the viscosity of the water and adheres to the surface of the combustible material to form a protective layer of radiation. Increased resistance to burning is not easy to re-ignite. It can be used in 0.1~1% ratio, rich in foam, fine and strong adhesion, good foam durability, stable water precipitation time, and low surface tension of liquid. When a Class A fire (solid fire) is extinguished, its foam can not only adhere to the surface of the burning object to form a layer of heat insulation and radiation protection layer, but also the stable and long-lasting foam will not flow freely, reducing water loss due to The continuous foam precipitates a viscous liquid with strong penetrability, which can penetrate deep into the flame of solid combustion products, promote and stabilize the water separation. The foam spreads rapidly under the action of water film, stable and durable foam and stability. The long-lasting water separation not only can quickly extinguish the fire, but also effectively prevents the re-ignition of the burning materials.
Executive standard: GB27897-2011
Flow point: ordinary type ≤ -4 ° C cold type ≤ -10 ° C - 32 ° C
Mixing ratio: 0.1~1%
Packaging and storage
1. Packing: 25kg, 50kg, 200kg plastic drums;
2. The product shall not be mixed with other chemicals and other types of foam fire extinguishing agent during transportation and storage;
3, the product should be stored in a cool, dry warehouse to prevent exposure, storage temperature is 0 ~ 45 ° C;

Environmentally friendly water fire extinguishing agent S/AR-10-AB
Executive standard: GB17835-2008
S/AR-10-AB water-based fire extinguishing agent is composed of xanthan gum, hydrocarbon surfactant, fluorocarbon surfactant, anti-burning agent and stabilizer. It is a new generation of environmentally friendly foam fire extinguishing agent. Good fire-extinguishing performance, no odor, non-toxic, non-polluting, non-corrosive equipment during storage and use, no residue, stable storage, is one of the ideal fire extinguishing agents for fire protection. It is mainly used for fighting general non-water-soluble (oil) flammable and flammable liquid fires. It is suitable for oil fires and general solid material fires in oil fields, oil depots, oil refineries, petrochemicals, ships, airports, etc.
Flow point: ordinary type ≤ -4 ° C cold type ≤ -10 ° C - 32 ° C
 Mixing ratio: 10% type and water mixing ratio is 10:90
Packaging, axis and storage requirements:
a. The product packaging specifications are 50kg, 200kg plastic drums.
b. The product should not be mixed with chemicals and other types of foam fire extinguishing agents during transportation and storage.
c. The product should be sealed and stored in a cool, dry and ventilated warehouse to prevent exposure. The storage temperature should be lower than 45 °C and higher than -2 °C.
d. The product has a shelf life of two years in the above environment in the original packaging.