Environmentally friendly Alcohol Resistant Foam Extinguishing Agent 3% (S/AR, -32 ° C) - seawater resistant
3% (S/AR, -4 ° C)

Water-soluble flammable liquids such as alcohols, esters, ethers, aldehydes, organic acids, and amines, etc., because of their strong molecular polarity, can absorb the water in the foam and cause the foam to burst, so protein foam, fluoroprotein foam cannot be used. And water filming foam to fight such liquid fires, but must use anti-solvent foam. It has good thixotropy and can be mixed in a ratio of 3:97 in various low-fold foam generators to extinguish flammable polar solvent fires. It can also be used to fight general oil fires. Widely used in large chemical plants, paint plants, solvent plants, alcohol plants, wineries, chemical warehouses, etc.

The technical indicators of the foam fire extinguishing agent performance are based on the national standard GB15308-2006:
Flow point: ordinary type ≤ -4 ° C cold type ≤ -10 ° C - 32 ° C
Mixing ratio: 3% type and water mixing ratio is 3:97
This product should be sealed and stored in a cool, dry and ventilated place. The temperature is 0~40 °C, and the validity period is at least 2 years.
Do not mix with other fire extinguishing agents to avoid affecting the effect.
The product packaging specifications are 25kg, 50kg, 200kg, 1000kg plastic drums.
The company can also configure special requirements for your unit.

Environmentally friendly Alcohol Resistant Foam Extinguishing Agent 6% (S/AR, -32 ° C) - seawater resistant
6% (S/AR, -4 ° C)

The technical indicators of the foam fire extinguishing agent performance are based on the national standard GB15308-2006:
Flow point: ordinary type ≤ -4 ° C cold type ≤ -10 ° C - 32 ° C
Mixing ratio: 6% type and water mixing ratio is 6:94

This product can be used in combination with fresh water or mixed with sea water.
This product should be sealed and stored in a cool, dry and ventilated place. The temperature is 0~40 °C, and the validity period is at least 2 years.
Do not mix with other fire extinguishing agents to avoid affecting the effect.
The product packaging specifications are 25kg, 50kg, 200kg, 1000kg plastic drums.
The company can also configure special requirements for your unit.